Create an Account - Increase your productivity, customize your experience, and engage in information you care about.
Call the water treatment plant at 928-774-0262. This could happen if fire hydrants are being flushed, the system is undergoing construction, a new home is being plumbed, or a garden hose is left pressured up and on. Someone will be glad to help you determine the cause of the problem.
Show All Answers
Call the emergency phone number at 928-774-0262.
Call the Customer Service Division to get your meter location at 928-213-2231.
Your water pressure depends on your elevation and pressure zone. Call Utilities Administration at 928-213-2400 and we can check our pressure map for your approximate water pressure should be.
Some homes have pressure-reducing valves located on the customer side of the meter box. These devices will occasionally fail and are your responsibility to repair or replace. Call us at 928-774-0262 and we will be happy to help you determine the problem.
Check to see if your bill was estimated last month. If so, this month may include water that was not in the estimate. The average Flagstaff residential customer uses 65 to 100 gallons per day. If your water consumption exceeds this amount per household member, you may have a leak. The most common cause of leaks is toilets with sticking float valves. Dye tablets kits are available at the Customer Service counter in City Hall. Another cause could be if you have an underground "stop and waste valve" that is not in the fully closed position or is leaking.
Your responsibility for your water service line starts at the meter, where the line attaches to the outlet meter coupling and continues to your house.
The City of Flagstaff does not make recommendations for particular plumbers. A good rule of thumb is to see if the plumber is licensed, bonded, and insured for residential and/or commercial work. Ask for references to find out about past work experience.
Most homes have a water shutoff valve located inside the house where the water service line enters. The City’s valve is located next to the water meter in the meter box. A special valve key is required to operate the valve without damaging it.
It varies from 25 ppm to 325 ppm, depending on the source of production. The average throughout the system is 125 to 200 ppm (7.3 to 11.7 grains per gallon).